O Ring
Model NO:JT-O02
O ring is O sharped rubber Ring,it’s circular cross-section,normally are mould pressing and heating from an elastomer.Primarily use to prevent loss of fluid or gas.It’s the most use in sealing products, because it’s effective, reliable and inexpensive.
Suitable for multiple modes of motion: rotational motion, axial reciprocating motion, or combination motion (such as rotational reciprocating combination motion)
Material:NBR(nitrile),SBR,Silicone,EPDM,Viton,FKM75-90,Buna-N,CR,BU,FVMQ,ect.
Color:Black,Green,Grey,White, Blue,Red,ect. If client request color can check with us.
Hardness:70-90,can make as require.
O Ring kit can make.
Polymer Type: Nitrile
|
Typical physical
|
Property(after 168 hours @100℃) |
Typical Values |
|
Color |
Black |
|
|
Hardness(˚IRHD) |
70 |
|
|
Tensile Strength(Mpa) |
17.5 |
|
|
Modulus |
7.1 |
|
|
Elongation |
188 |
|
|
Tear Strength |
32.4 |
|
|
Specific Gravity(g/cm3) |
1.19 |
|
|
AIR-AGEING |
Property(after 168 hours @100℃) |
Typical Values |
|
Hardness Change(˚IRHD) |
+4 |
|
|
Tensile Change(%) |
-15.5 |
|
|
Elongation Change(%) |
-38.8 |
|
|
Property(after 336 hours @100℃) |
Typical Values |
|
|
Hardness Change(˚IRHD) |
+6 |
|
|
Tensile Change(%) |
-21.3 |
|
|
Elongation Change(%) |
-46.3 |
|
|
ABSORPTION TEST |
Property(after 168 hours @100℃) |
Typical Values |
|
IRM 901 OIL |
|
|
|
Volume Change(%) |
+1.4 |
|
|
Hardness Change(˚IRHD) |
-2 |
|
|
Property(after 336 hours @100℃) |
Typical Values |
|
|
IRM 903 OIL |
|
|
|
Volume Change(%) |
+14.6 |
|
|
Hardness Change(˚IRHD) |
-11 |
*Note: All data s for take reference,subject to the actual situation.All rights belong to our factory.