Carbon Fiber Packing Impregnated with PTFE
Model NO:JP-3030
[Original]:Made in China/Ningbo City
[Key Words]: Carbon fiber PTFE Packing;Carbonized Fiber PTFE Packin;Carbon Fiber with PTFE
[Brief Introduction]:Carbonized fiber packing is manufactured by heating polyacrylonitrile fiber into carbonized fiber, which is then braided into packing after impregnation in PTFE dispersion. This item has good heat conduction and low corrosion rate,and the price is relatively lower, so it’s generally used in dynamic sealing in the presence of weak acid or alkaline media, or media that contains few solid particle grains.
[Technical Data]:
Rotating | Reciprocating | Valves | |
Max.Pressure | 3.5Mpa | 12 Mpa | 15Mpa |
Shaft speed: | 15m/s | 2m | 2m/s |
Temperature | -100℃to +260℃ | ||
PH range | 2~12 | ||
[Other Types]:reinforced by Inconel wire/SS wire in each strand/Supply OEM products.
[Package]:5kg/roll, 10kg/roll,etc.
Model No. | Carbon fiber packing |
JP-3000 | Carbon fiber packing |
JP-3010 | High Carbon fiber packing impregnated in graphite |
JP-3020 | Carbonized fiber packing impregnated in graphite |
JP-3030 | Carbonized fiber packing impregnated in PTFE |
JP-3040 | Graphite packing reinforced by stainless steel wire/Inconel wire |
JP-3050 | Graphite fiber Packing with graphite |
*Note: Detail data please load our catalog in PDF,all data for take reference.Subject to the actual situation.All interpretation rights belong to our factory.